0800 345 7003
Keeping cats secure with elegant cat containment systems
The following list is the full range of components available for Katzecure installations. A survey will identify the full list of components required to secure your garden.
Prices
Standard Axle
Two 10mm axles with plastic bearing and retainer springs.
£7.00
Deluxe Axle
Two 10mm axles with ball race and retainer springs.
£12.00
Drilling Jig
Tool used as a guide to ensure the correct location of the 10mm axle holes in the end of the Katzecure poles.
£12.00
Pole End Sleeves
The Pole End Sleeves are only fitted to the upper row of wooden poles, unless they are also specifically requested for the lower row for aesthetic reasons. The plastic Pole End Sleeves are required for both ends of all plastic poles.
Wooden Pole: £8.00
Plastic Pole: £7.00
Standard Pole
Standard pole - Standard 1.65 meter (5 foot 3 inch) long, 75 mm (3 inch) diameter, machine round wood pole.
£15.00
Plastic Pole
1.60 meter long 76 mm diameter plastic pole.
£10.00
Aluminium pole
1.60 meter long 3 Inch 16 swg (76.2 x 1.6 mm) Aluminium Pole
Price on application
Top, Internal or Staggered System, Double Pole Brackets.
Please Note: that the images are of the Internal System only
Starter Kit
Two simple bracket fitted with a two Standard Runners, designed for fitting at the end of a pole run. These are ‘handed’ either left or right as you view the poles.
£59.00
Continuation Kit
One simple bracket fitted with four Standard Runners, two on each side, designed for fitting in the middle of a double pole run.
£48.00
90° Inner Corner Kit
One bracket fitted with four standard runners to turn a 90-degree inwardly facing corner.
£70.00
270° Outer Corner Kit
One bracket fitted with four standard runners to turn to an outward facing corner.
£70.00
End Protectors (Right / Left)
These parts fit to the outer corner brackets or to the single sided double brackets, they offer added protection for particularly adventurous cats (Houdinis) that might attempt to escape via these points.
£12.00
Additional Starter Kit
Two simple brackets fitted with a Standard Runner, designed for fitting at the end of a single pole run. Fittings supplied: Standard Axles, Springs and tubes.
£30.00
Additional Continuation Kit
One simple bracket fitted with two Standard Runners, designed for fitting in the middle of a single pole run. Fittings supplied: Standard Axles, Springs and tubes.